激光切割加工中出现什么问题会出现次品

　 激光切割加工中出现什么问题会出现次品?

   高质量的激光切割加工是不会出现精度不够、产品出现熔渣、毛刺、切割截面齿纹明显等一系列问题的，其实激光切割薄板出现烧边的问题也可以避免，这些都不会因为材质的问题受影响。所以一旦出现这些问题，无论厂家如何解释，这些都是不合格的。其实这些问题只要会调节都是可以改变的，就像切割边缘锯齿非常明显这种，大多数是切割的速度调的太快，而活着电极喷嘴不同轴等情况。当然还有一种可能是切割超过设备切割能力的产品，因为功率达不到所以切割的非常费力，表面锯齿就会非常明显。

    从上面的介绍我们可以看出，除了技术人员的问题之外，设备的优劣也会影响激光切割产品的质量。所以大家选择激光切割交给你厂家的时候，可以先了解一下设备情况。总的来说，激光切割加工出现毛刺、熔渣、锯齿、精度不高等问题之后都代表了产品的不合格。当然这些问题当中毛刺算是比较小的问题，只不过需要后期人工用矬子搓掉。(http://shyuhewh.com)

  What problems will happen in laser cutting process?
The high quality laser cutting is not accurate enough, the product appears slag, burr, cutting cross section tooth lines obvious and so on a series of problems, in fact, the laser cutting thin plate burning edge problems can also be avoided, these will not be affected by the material problems. So once these problems arise, no matter how the manufacturer explains, these are not qualified. In fact, these problems can be changed as long as the adjustment can be changed, like cutting edge saw teeth very obvious this, most of the cutting speed is too fast, and the living electrode nozzle of different axis and other conditions. Of course, there is one kind of product that can cut more than the cutting ability of the equipment, because the power can not reach the very hard cutting, the surface zigzag will be very obvious.
From the above introduction, we can see that apart from the technical personnel's problems, the quality of the equipment will also affect the quality of laser cutting products. So when you choose laser cutting to your manufacturers, you can first understand the equipment. On the whole, laser cutting appears problems such as burrs, slag, sawtooth, and low accuracy. Of course, burr is a relatively small problem in these problems, but it needs to be rubbed off later.

新闻、技术文章、资料下载网站声明
资料编辑人：北京激光切割小编
乐鱼电竞隆工
电话： 13901087230

• 北京激光切割加工的原理分析

  2024-01-10

• 2016年春节乐鱼电竞隆工激光切割加工开工通知

  2016-02-20

• 北京乐鱼电竞隆工承接各种材质激光切割加工业务

  2015-06-23

• 不锈钢切割的过程中容易出现的问题

  2014-08-26

• 想要开不锈钢加工厂应该准备或注意什么

  2014-08-14